AGRICULTURE
Single-antenna CPT7700 enclosure with GNSS+INS technology
The CPT7700 is an ultra-compact enclosure containing an OEM7700 receiver from Hexagon | NovAtel and a high-performing Honeywell HG4930 Micro Electromechanical System (MEMS) Inertial Measurement Unit (IMU) to support leading-edge SPAN technology from NovAtel in an integrated, single enclosure solution. The absolute accuracy of Global Navigation Satellite System (GNSS) positioning and the stability of Inertial Measurement Unit (IMU) gyro and accelerometer measurements are deeply coupled to provide an exceptional 3D navigation solution with reliable velocity and attitude measurements. The internal OEM7700 receiver offers simultaneous tracking of multi-GNSS signals across all frequencies.
It provides tactical grade performance for unmanned vehicles, mobile mapping and other commercial and military guidance applications. The CPT7700 is a small, lightweight and low-power solution with multiple communication interfaces for easy integration on various platforms. The deep coupling of GNSS and INS measurements enhances satellite tracking and enables the most continuous positioning possible.
Features
- MEMS gyro and accelerometers
- SPAN GNSS+INS capability with configurable application profiles
- Advanced interference mitigation features
- Dedicated wheel sensor input (DMI)
- Purchasable upgrade for high IMU data rate (up to 400 Hz)
- Internal data logging and transfer (16 GB)
- Four receiver status LEDs
- Event in and event out to support 1 PPS
- Multiple communication interfaces
- Commercially exportable system (non-ITAR)
Attributes
| System Type | Enclosed with IMU GNSS+INS enabled |
|
| General Info | Length (mm) | 90 |
| Width/Diametre (mm) | 60 | |
| Height (mm) | 60 | |
| Weight (g) | 500 | |
| Typical Power Consumption (W) | 9 | |
| Signal Tracking | GPS | L1C/A, L1C, L2C, L2P, L5 |
| GLONASS | L1C/A, L2C/A, L2P L3, L5 | |
| BeiDou | B1l, B1C, B2l, B2a, B2b, B3l | |
| Galileo | E1, E5 AltBOC, E5a, E5b, E6 | |
| NavIC (IRNSS) | L5 | |
| SBAS | L1, L5, L6 | |
| QZSS | L1 C/A, L1C, L2C, L5 | |
| L-Band (primary RF only) | Up to 5 channels | |
| Number of Com Ports | RS-422 | 1 |
| RS-232 | 1 | |
| Ethernet | 1 | |
| RS-232 (230 400 bps max) | 1 | |
| USB Device | 1 | |
| CAN Bus | 1 | |
| Event Input | 3 | |
| Event Output | 3 | |
| Wheel Sensor Input | 1 | |
| Performance | Accuracy | (RMS) |
| Single Point L1 | 1.5 m | |
| Single Point L1/L2 | 1.2 m | |
| SBAS | 60 cm | |
| DGPS | 40 cm | |
| TerraStar-L | 40 cm | |
| TerraStar-C PRO | 2.5 cm | |
| TerraStar-X | 2.0 cm | |
| RTK | 1 cm + 1 ppm | |
| IMU Raw Data Rate | 100 Hz or 400 Hz | |
| Gyroscope Performance | Technology | MEMS |
| Input Rate (max) | ±325°/S | |
| Accelerometer Performance | Technology | MEMS |
| Range | ±20 g |
GNSS VEXXIS® Series Antennas
The VEXXIS GNSS-800 and GNSS-500 series antennas offers high performance solutions and superior tracking performance for your application needs.
Inertial Explorer Xpress GNSS+INS post-processing
A simplified and cost-effective version of Inertial Explorer tailored for UAV markets and smaller project areas with short baselines.
Inertial Explorer GNSS+INS post-processing
The flagship Waypoint software product, Inertial Explorer maximises the accuracy of your GNSS+INS trajectory post-mission with tightly coupled integration for generating...
